Another twisted triangle

Guess what? Despite my laziness I managed to finish the tutorial for the twisted triangle! You could see the design here before, but when I was making it for the second time, I decided to change one thing. Don't know about you, but for me the new version looks a bit better. :)

I used Toho Treasure again - gold lined aqua - and I must say that I didn't expect them to look so good in a beadwork. Depending on the light they look like a cold steel or they have a warmer, yellowish tint. Worked good with some antique bronze seed beads, I think.

The triangle measures 6,5 cm (2.5") at the widest point.

The tutorial is available here on Etsy.

Now I have to go back to work... I promised to prepare the tutorial for the twisted square too...
Have to keep my promise, you know! ;)
So I'll see you some other time. Have a wonderful day! :)

Twisted Star - again :)

The series of twisted patterns is not over yet. The instruction how to make the flower from the previous post not only is already available here on Etsy, but it is also accompanied by the tutorial for the twisted star. You could see one on this blog already, today I can show you another one.

This one is a little bit (two rows) smaller than the blue star, with a black edge that makes it look even smaller. This time I made it with Toho Treasure beads in one of my favourite color - Gold Lustered Raspberry. There's a beautiful square crystal in the middle (thank you Marcie, it is truly gorgeous!).

The pendant measures 6,5 cm (2.5") at the widest point and the pattern can be found here.

Please remember that I don't recommend any of these patterns for beginners. You should really be familiar with peyote stitch in order to make it. But if you want a challenge, well I won't stop you anyway. ;)

Hopefully I'll be able to prepare the rest of the promised tutorials for a twisted square and a triangle soon. I'll do my best. :)
And until then, take care, all of you! :)

 

Twisted flower

After a few bracelets it's about time for more pendants. And for more twisted designs, as it has been a while since I have shown the last one. :)

This time it is a twisted flower - or at least something that looks like a flower to me. Traditionally made with Delica beads and seed beads in three different sizes, with a glass pearl in the center. It is quite big, because it measures something like 6,5cm (2.5") at the widest point.

The good news is that the tutorial for this pendant is ready. :) I just need to test it before I can publish it, so you'll probably see another twisted flower soon. And I am really happy to announce that June Huber, the master of twisted peyote, has given me a written permission to publish the tutorials for these of my designs, which are based on her idea of combining the beads in certain order to achieve the twisted effect. Thank you, June! :)

So here's the pendant... and I'll see you soon again.

Have a great day! :)

Edit: This tutorial is already available here. :)



"Geometrica" - another beaded bracelet

It's hard to believe, but I realized that I have made more bracelets than pendants recently. Since I wear them only when it is warm, it must be the obvious sign that my beading mind is slowly switching to the spring mode. ;)

Another bracelet pattern is called "Geometrica" and it calls for 6mm CzechMate Tiles, SuperDuos, 3mm fire polished beads and seed beads in two sizes. I must say that in the beginning I wasn't very happy with this design, without any actual reason. Just didn't like it much. But I decided to give it another chance and made a second bracelet - turquoise tiles and bronze SuperDuos did the trick! Suddenly I started loving this pattern - and there are three sets of beads on my desk at the moment waiting to turn into these bracelets. I was just waiting for some black tiles, which arrived just today, so hopefully I'll be able to show you some more versions of this pattern.

You don't have to wait for me though if you want to see the bracelet in some other colour variations. Just make your own - as the tutorial is available here in my store on Etsy. ;)

The bracelet is 1,8 cm (0.7") wide and this is how it looks like:

Yep, the white&blue one was the bracelet I didn't really like. But later I thought that I have made worse things before, so I can show it to you anyway. ;) I still like the bronze version better. Much better. ;)

Thank you for visiting the blog, all your kind words and your support in general. Lots of hugs to all of you! :)

Simplicity - beaded bracelet - free pattern! :)

Just as I promised yesterday, I've got for you the free tutorial for a beaded bracelet. "Simplicity" is yours now. ;)

 

You will need:

6mm round beads

SuperDuo beads

4mm fire polished beads

8/o seed beads (2 pcs)

11/o seed beads

Your favourite beading thread

Beading needle size 10

2 x metal jump rings (optional)

A clasp of your choice

This tutorial ;)

The exact number of beads depends on your individual desired length. For a 15cm (6") long bracelet (without the clasp) I needed 15 x 6mm beads.

The bracelet is 2,5 cm (1") wide.

1. String 1 x 6mm round bead and 1 x 8/o seed bead. Pass back through the 6mm bead as shown in the left picture.

2. String 1 x 11/o seed bead, 3 x SuperDuo beads, 1 x 11/o seed bead and pass again through the 6mm round bead. Repeat the entire step one more time, so your beadwork looks like in the right picture..

3. String 1 x 4mm fire polished bead and 1 x 6mm round bead.

4. Repeat step 2 for the current 6mm bead.

5. Repeat steps 3-4 until you have reached the desired length of the bracelet.

6. Pick up 1 x 8/o seed bead, pass back through the 6mm bead, then pass through the beads so your thread is exiting from the just added 8/o bead.

7. Pick up 2 x 11/o seed beads and pass through the upper hole of the nearest SuperDuo as shown in the picture.

8. Pick up 1 x SuperDuo and pass through the upper hole of the next SuperDuo from the previous round. Repeat one more time.

9. Pass through the upper hole of the nearest SuperDuo as shown in the picture.

10. Repeat steps 8-9, ending with step 8, until you have reached the end of the bracelet.

11. Pick up 2 x 11/o seed beads and pass through the 8/o seed bead.

12. Repeat steps 7-11 on the other edge of the bracelet as shown in the picture. At the end pass through the first 2 x 11/o seed beads added in this round.

13. Pick up 3 x 11/o seed beads and pass through the upper hole of the nearest SuperDuo added in the previous round, as shown in the picture.

14. Pick up 1 x 4mm fire polished bead and pass through the upper hole of the next SuperDuo bead.

15. Pick up 1 x 11/o seed beads and pass through the upper hole of the nearest SuperDuo as shown in the picture.

16. Repeat steps 14-15, ending with step 14, until you have reached the end of the bracelet.

17. Pick up 3 x 11/o seed beads and pass through the 2 x 11/o seed beads, 1 x 8/o bead, 2 x 11/o beads as shown in the picture.

18. Repeat steps 13-17 on the other edge of the bracelet. At the end pass through the first 3 x 11/o beads added in this round.

19. Pick up 3 x 11/o seed beads and pass through the nearest 4mm fire polished bead.

20. Pick up 4 x 11/o seed beads and pass through the next 4mm fire polished bead.

21. Repeat step 20 until you have reached the end of the bracelet.

22. Pick up 3 x 11/o seed beads and pass through 5 x 11/o seed beads, 1 x 8/o bead, 5 x 11/o beads as shown in the picture.

23. Repeat steps 19-22 on the other edge of the bracelet.

24. Insert a jump ring inside the 8/o beads on both sides of the bracelet or make beaded loops, attach a clasp, make and secure the knots, trim the remaining thread and enjoy your new beaded bracelet.

CONGRATULATIONS! :)

And one more thing for the end... I hope you enjoyed making this bracelet and the tutorial was helpful for you. I will be happy to receive some feedback, and if you have any suggestions what should be changed in this tutorial, feel free to contact me. If you are going to show this bracelet on your blog or any other website, please give me a credit for being the author of this pattern.

Happy beading!

Author: Justyna Szlęzak, Eridhan Creations

eridhan.blogspot.com

Unauthorized copying and/ or commercial use prohibited

Copyright by Justyna Szlęzak 2014

--------------------------------------------------------------------------------

The printer friendly pdf file with the whole instruction is available here on Etsy.

Disclaimer: Please do not sell the items you made from the free tutorials. If you want to sell the items, please purchase the pdf files I offer on Craftsy and Etsy - that gives you the right for selling your creations. Thank you.

Simplicity - beaded bracelet

Since I have no excuse anymore to stay away from the blog, I would like to show you another bracelet. Yes, a bracelet, not a pendant, for once! ;) Even a few bracelets, since the pattern was so nice, easy, fast and simple to make. True Simplicity indeed. ;)

You will need some 6mm round beads, SuperDuos (lots of them!), 4mm fire polished beads and 11/o seed beads. The full tutorial however will be published tomorrow. I still have an illustration or two to finish by now.

The bracelets are 2,5 cm (1") wide. And this is how they look like:

Remember, the free tutorial will be available soon. So stay tuned!. ;)

Until then, my friends. :)

Sea Urchin - tutorial - and other water creatures ;)

I know, I know, I wasn't here for a long time again. This time though it wasn't just because of my laziness. ;) I was working pretty hard, restarting my 240l aquarium, which got quite neglected during my treatment last year. It didn't look good at all anymore so I just had to do something about it. It took quite a long time - I had to move the fishes to a small tank where they could live for more than a week, clean something like 70 kilos of gravel, prepare a huge amount of water, deal with two buckets of water plants, then wait until I could move the fishes to their old home again...  I still have to keep in check all the water parameters if I don't want any algae to appear, until the aquarium becomes fully stabilized, but now it is quite pleasant to look at it again. ;)

I have done a little bit of beading since my last post though. The Sea Urchin pendant is one of the pieces that some of you  have seen already (and some of you have even made it from my tutorial). ;) I guess it is time to show it finally on my blog too. It is made with 13mm spikes, SuperDuos, fire polished beads and seed beads. Not so difficult to make, I can assure you. It measures around 4,5 cm (1,77") in diameter, without the bail.

The tutorial is available here on Etsy. If you want the Polish version I would suggest waiting for the summer issue of Beading Polska magazine. :)

Here you can see two different colour versions:

But make sure to visit Silke's blog too! She made a really beautiful, blue version of the pendant!

Before I say good bye for now, I'll show you some pictures of my private underwater world too. These are different views of my aquarium, when it still looked good. The current layout can't be shown until all the plants will grow some more. ;)
So, enjoy and see you soon! :)